Basic Info.
Key Word
Wireless Charger PCBA
Application
Wireless Mobile Phone Charger
Transport Package
Bubble Anti-Static Bag
Specification
PCB: 56*52*2.6 mm, Coil + ferrite: 88.5*60*3.8 mm
Product Description
Qi Wireless Charger PCBA Circuit Board Coil Wireless Charging
Wireless charging module can be customized, welcome your design!
1. Product introduction
This module is a fast wireless charging dual coil program, can Samsung's Note5, S6edge +, S7 and S7 edge for fast wireless charging and can be horizontal, vertical, in 2 hours full of support for wireless fast-charge mobile phone; The same time on the 5W Wireless charging mobile phone has a good compatibility, can support Ti, IDT, Panasonic Qi standard receiver.
2. Specifications
2.1 Maximum Ratings
| Parameter | Symbol | Rated value | Unit |
| Working temperature | Ta | -40to +85 | °C |
| Stored temperature | Tstg | -65 to +150 | °C |
| Storage humidity | Tstr | < 95% | RH |
| Supply voltage | Vcc | -0.5 to +6.5 | V |
| Supply current | Imax | 2 | A |
2.2 Rated parameters
Test conditions: Ambient temperature 25 ° C.
| | Test Conditions | Rated value | Minimum value | The maximum value | Unit |
| Normal power | Vcc = 5V | 100 | 80 | 150 | MW |
| Working frequency | Adjust the load and distance | / | 105 | 189 | kHz |
| Transmission efficiency | Bq51013xEVM test | 70 | 50 | 75 | % |
| Operating Voltage | 5W output | 5 | 4.5 | 5.5 | V |
| Operating Voltage | 10W output | 9 | 8.5 | 10 | V |
| Output Power | Fast mode | 9.5 | 9 | 10 | W |
| Working distance | Bq51013xEVM test | 8 | 2 | 10 | mm |
| Protect the temperature | PCB board temperature protection | 70 | 68 | 73 | °C |
2.3: Other parameters
| PCB size | 56*52*2.6 mm |
| Coil + ferrite | 88.5*60*3.8 mm
10W double coil |
3. LED status indication
After turning on the power LED display: Blue, green, light blue
Advantage of High quality Qi PCBA DIY Wireless Charger Wireless Charging Circ
| Color\ status | Standby | Charging | Full | Errors |
| Blue | Off | On | Off | |
| Green | Off | Off | On | Flash |
Error Description: There are two cases of error: One is power on the wrong: This is the module to check their own mistakes, may be too high power supply voltage, temperature anomalies, coil errors. The other is the work process error: Mainly to detect foreign matter or temperature is too high.
1. We are factory: Good price & fast delivery of wireless charger module transmitter coil with PCBA.
2. OEM/ODM, customers design is welcome of wireless charger module.
3. Reliable quality, we only use A-grade row material of wireless charger module.
4. Excellent service, fast reply of wireless charger module transmitter coil with PCBA.
6. Related Questions:
1, what is the difference between fast wireless charging and ordinary 5W wireless charging?
Fast wireless compatible 5W products, when recognized to 10W will increase the power to about 10W. Fast wireless charging 2 hours can be filled with 3000mA battery, ordinary 5W wireless charging to more than 3 hours.
2, what phone support?
At present, Samsung's S7 \ S7Edge \ Note5 and S6 Edge + four phones.
3, test fast charge what is the condition?
There are support for mobile phones, 9V Qualcomm 2.0 fast head, mobile phone settings have been opened fast charge function, the power is less than 90%, the display reads as follows:
4, how to test whether there is fast charge?
Comprehensive approach: The phone below 10% of the electricity, then fast charge 120 minutes to fill the phone
Simple way: To see whether the phone shows fast charge, whether the fan has to turn up or monitor the input power is greater than 8W.
5, fast charge over Qi certification?
Currently more than 10W Qi certification and no relevant certification, fast wireless charging can only be compatible with the 5W old equipment Qi certification
FQA
1. Question: What are your main products?
Answer: Our main products are: Wireless charger module design, wireless charger with PCBA,
Tx-coil /Rx-coil for wireless charger, Inductor coil,
Toy coil, RFID antenna coil, IR-Coil for camera, Coin collector coil,
IC/ID card coil, Card Reader coil, VCM coil, etc.
2. Question: Could I get free samples for testing?
Answer: We have different types of transmitter coils ready as sample for you.
3. Question: How to make the samples?
Answer: Supply drawing is the best, or tell us the size, inductance, resistance and etc.
4. Question: Lead time for samples?
Answer: 3-5 working days
5. Question: Lead time for mass production?
Answer: 7 to 15 working days or depending on order quantity.
6. Question: What are the payment term?
Answer: T/T, Western Union, PayPal or negotiation.
){kind=link}